Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Dania Beach, FL
Gate Installation in Dania Beach is different work than it is a few miles inland. Many properties here sit on canal-front or beachside lots facing the Intracoastal or the Dania Cut-off Canal, where salt-laden onshore air and storm-driven spray reach every hinge, frame and operator housing. That changes what we specify, how we set posts, and how we protect the motor and control board from day one. Whether your street has 1970s single-family homes or a newer gated townhome community near the port, the gate has to be built for marine air. Call (855) 644-1097 for a free estimate.
Why Dania Beach Homes Are Different
The single biggest factor in Dania Beach gate work is salt. Lots directly facing the Intracoastal or the Dania Cut-off Canal get a constant film of salt spray, and gates on those properties corrode far faster than identical setups a few miles inland in Hollywood or Fort Lauderdale. We regularly see operators and hardware on the Intracoastal side of Dania Beach Road seize up while the same model west of US-1 is still running fine.
Housing stock matters too. East of US-1 you’ll find older single-family homes and small multi-family buildings from the 1950s through the 1970s, many with aging manual gates and original hardware. Closer to the port, newer gated townhome communities and marine-industrial lots have automatic driveway gates that take a beating from high humidity, a long wet season and hurricane-season debris. Sun-degraded operator boards and rusted hinges are the two failures we see most. All of it sits in a subtropical marine climate where metal simply ages faster than homeowners expect.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Dania Beach Services
Most calls we get from Dania Beach homeowners fall into two groups: a gate that has stopped working, and a powered operator that needs real electrical and control work.
Gate Repair in Dania Beach
Manual and automatic gates take a lot of punishment from salt air and storm debris here. When we look at a gate in Dania Beach, we start with the frame, hinges and rollers, because corrosion is usually the root cause rather than a symptom. Salt spray along the canal-front streets eats at welds and pivot points, and a gate that drags or sticks is often a hardware problem, not an operator problem. We work through the structure first, then the moving parts, so the repair holds. For structural and mechanical fixes, see our Gate Repair in Dania Beach page.
Electric Gate Repair in Dania Beach
Powered gates on the Intracoastal side age faster than the same units inland. High humidity and salt air attack operator boards, wiring connections and limit switches, and hurricane-season power surges and debris add to it. Our technicians have up to 12 years of experience diagnosing both residential operators and commercial-grade systems, so we test the actual fault instead of guessing. Control boards, safety edges and power runs all get checked in one visit. For operator and electrical work, see Electric Gate Repair in Dania Beach.
Gate Installation in Dania Beach
Installing a gate in Dania Beach means building for salt from the first post. Homes east of US-1 often have older lots and aging manual gates ready for replacement, while newer townhome communities near the port need automatic driveway gates that can handle marine humidity and storm-season debris. Our Gate Installation work starts with the site, the soil and the exposure, then matches the operator and hardware to the conditions instead of selling whatever is on hand.
We take on installation as a measured, scheduled job. There’s no same-day promise here because a good gate needs the right hardware ordered for your property. What you get instead is a free on-site measure and a written price before anything is ordered or built.
Automatic Gate Installation
Signs you need it
You’re replacing a manual gate that’s hard to move or a failed operator, or you want a driveway gate that opens without leaving the car on a busy Dania Beach road.
What it costs in Dania Beach
Most automatic gate installations in Dania Beach run $3,200 to $7,500 and up depending on gate size, operator and any power run, with the written estimate setting the final price.
How we do it
We measure the opening, set the posts to proper footing depth, mount and align the gate, install the operator and safety edges, and test the full cycle before we hand it over.
Driveway Gate Installation
Signs you need it
Your driveway needs a swinging or sliding gate to secure the property, or a storm-damaged driveway gate is beyond repair and the hardware has rusted past saving.
What it costs in Dania Beach
Driveway gate installation typically runs $2,500 to $6,800, reflecting gate material, hardware and operator, with salt-resistant finishes adding to the range.
How we do it
We lay out the driveway entrance, set footings for the posts, hang the gate for smooth travel, then fit hinges, stops and any operator and confirm clearance over the full swing.
What Gate Installation Costs in Dania Beach
| Item | Typical range in Dania Beach |
|---|---|
| Automatic gate installation | $3,200 – $7,500 |
| Driveway gate installation | $2,500 – $6,800 |
| Electric gate installation | $3,500 – $8,000 |
Do I need a permit to install a gate in Dania Beach?
Most installations that add power or alter a property line require a permit. Ask Dania Beach’s building department before work starts, and check any HOA rules on gate style and setbacks. We can walk you through what your job likely needs.
Can you install a gate that holds up to salt air near the canal?
Yes. We choose salt-resistant finishes and position operators and control boards to limit spray exposure, which matters most on the Intracoastal and canal-front lots. That planning is part of every installation estimate. Call (855) 644-1097 for a free measure.
Brands We Service in Dania Beach
Our technicians work across the major gate brands, including LiftMaster, FAAC, Elite and Mighty Mule, on both residential and commercial-grade systems. We don’t claim to stock parts for every brand, but we know how they diagnose and where the failures tend to land, which keeps turnaround short. You can see the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Dania Beach, FL
| Service | Typical range in Dania Beach |
|---|---|
| Automatic gate installation | $3,200 – $7,500 |
| Driveway gate installation | $2,500 – $6,800 |
| Electric gate installation | $3,500 – $8,000 |
| Gate repair (manual or automatic) | $180 – $650 |
| Electric gate repair (operator, board, controls) | $250 – $900 |
| Hinge, roller and hardware replacement | $150 – $450 |
| Operator control board replacement | $350 – $850 |
| Safety edge and sensor work | $200 – $600 |
Two things push price up in Dania Beach: heavy corrosion that means more hardware has to be replaced rather than adjusted, and power runs for a new operator on an older lot. Everything is quoted and agreed before any work starts, so you see the written price first and nothing gets added later.
Neighborhoods We Serve in Dania Beach
We work across Dania Beach, from the canal-front and Intracoastal properties to the streets east of US-1 and the newer townhome communities near the port. Salt exposure and gate age vary a lot block to block, so we look at your specific setup rather than assuming. Fast dispatch runs from 7am to 7pm, Sunday through Friday, and we answer the phone 24/7.
- Dania Beach Road and the Intracoastal side
- The Dania Cut-off Canal frontage
- Streets east of US-1
- Townhome communities near the port
- West of US-1 inland properties
Service Area – Cities Near Dania Beach
Dania Beach sits between several communities we cover, so we can usually reach neighboring areas on the same schedule. If you’re just outside the city line, we can still help in Ojus, FL, North Miami, FL, Miramar, FL and Pinewood, FL. Call (855) 644-1097 and we’ll confirm coverage and schedule your free estimate.
Serving Dania Beach, FL – Our Local Coverage Area
We serve Dania Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Dania Beach
We answer the phone 24/7 and dispatch technicians from 7am to 7pm, Sunday through Friday, with same-day service available for many repairs. A call outside dispatch hours is booked into the next opening. Call (855) 644-1097 to schedule.
Power-connected gates and anything changing the property line usually need a permit from Dania Beach’s building department, and HOAs often have rules on gate style and height. Confirm both before ordering, and we’ll help you understand what your job involves.
Yes. We serve Dania Beach from the Intracoastal and canal-front streets to the properties east of US-1 and near the port, plus nearby cities. Call (855) 644-1097 and we’ll confirm your address and set up a free estimate.
If your gate is sticking, corroded or ready to be replaced, the fix starts with a call. Reach us at (855) 644-1097 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Whether your gate is a LiftMaster or a Mighty Mule, a canal-front driveway or an inland townhome, we’ll look at the actual problem and give you a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Dania Beach Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Katie Reed"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Michelle Lin"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Andres Castillo